www.firsthse.com

Maintenance work using a Stepladder.

Risk Management Document

Reference94

General Information

Position
Maintenance technician 
First Edition
19/12/2023
Work Location
All locations 
Last Update
27/09/2024
Summary of the Operation
This Risk management sheet is ment as an exemple to show you how you can create with ease and structure.

Conformity

Before you begin, please make sure the following requirements are met:
People
Authorization 
Check that only maintenance team are accessing the work location 
Permit to Work 
sdfsdfChqsdqsdeck that PTW are issued for works inside the engins room 
Medical Clearance 
 
Training / Certification 
Check that all electrical authorization are valide for the whole team 
Workplace
Lighting 
Check that are enough lighting for the inside operation, specially during nightshift 
Housekeeping 
Check that all the paths for stepladder transfer are free from any obstruction 
Safety Sign 
Check the safety signs "Maintenance Work ongoing" is available and visible 
Safety Sign 
sdfsdfsddf 
Safety Sign 
 
Color Code labeling 
 
Floor Marking 
 
Color Code labeling 
 
Floor Marking 
 
Color Code labeling 
 
Noise Level 
Check the monitoring the the level of noise is done before any operation inside the engin room 
Chemicals
Packing Integrity 
sdf 
Storage Conditions 
 
Transportation 
 
Machines, Equipment & Tools
sdfsdf  
Certification 
 
Isolation 
 
Isolation 
 
Corrosion 
 
Corrosion 
 
Load 
 
Power 
 
Other 
 
Load 
 
Power 
 
 
Corrosion 
 
Energy 
 
Capacity 
 
Integrity 
 
Energy 
 

www.firsthse.com

Maintenance work using a Stepladder.

Risk Assessment Sheet

Reference:RA0094

Risk Assessment

1. Works on the stepladder


Hazard
Unwanted Events
Engineering Controls
Falls
Fall from height
While climbing and working on the top of the stepladder
 
 
 
 
 
 
Instructions
Point of operation   kjhkdjhfgdfg
Speed Limit   sdfsdf
customized   sdfsdf
2   zezer

Hazard
Unwanted Events
Engineering Controls
Fall of Objects
Falling object from height
While using tools and object at height
Tool belt to store tools and objects when at height
Baseboard around the working platform to prevent fall of objects
Wrist strap for all the tooling used at height
Falling object on the lower limbs
 
Instructions
Workplace Layout   Never leave objects or tools on the working platform
Cleaning   Keep the working platform clean from any slippery substances

Hazard
Unwanted Events
Mechanical
Caught between two objects (crushing, pinch point)
 

2. Doing electrical work at height


Hazard
Unwanted Events
Engineering Controls
Electrical
Contact with an energized source or conductor
while replacing fuses on the electrical boxes at height
Lock out Tag Out on the main electrical cabinet
Nonconductive covers on all the tools to be used
Instructions
Point of operation  
Body part position  
Weight Limit  
Speed Limit  
Height Limit  
Time limit  
Step / Flow / Way  
Monitoring   Always keep an eye on the main electrical cabinet so the LOTO will never be compromised
Human Support  

3. Use of a drill at height


Hazard
Unwanted Events
Mechanical
Hit by a solid flying object (projection)
from the drill debris or if the drill bit broke
Instructions
Point of operation   Always keep the drill straight when drilling
Step / Flow / Way   Never use the drill with one hand
Body part position   Never allow anybody to stand on the sides of the drilling point exposed to projections
Safety Distance   Always keep the drill at a safe distance in front of you (never lean over the side of the drill)

Hazard
Unwanted Events
Engineering Controls
Thermal
Contact with a very high temperature surface, material or flame (Burn)
with the drill bit right after the drilling ends
Heat proof cover to remove the drill bit after the ops
Heat proof cover to remove the drill bit after the ops
Instructions
Time limit   Always leave the drill bit cold down before change it

Personal Protective Equipment

Type
Specifications

EN812:2012

Glasses

Clear type EN 166F

Ear plug

EN 352-2 with N35Db protection

Mechanical protection gloves

CAT. II Precision model

Harness

EN 813 certified

Harness